See if you can make such a change in BIOS Setup for the fan. For this you may be able to re-adjust the fan control system to increase the minimum speed it is told to run at the lowest temperatures. OR, the fan control system has been set to a minimum speed (for lowest temperatures and workload) that really is too slow, allowing the fan to stall. 1.Fans are solely responsible for the intake and exhaustion of air to and from your PC, so it’s imperative that you keep them well maintained. IF the fan is old and worn, it may stall because of bearing friction even if the speed control signal sent to it is what would have been adequate when the fan was new. If that is too slow, the fan will stall again and the cycle repeats. But no matter what you do, the fact will remain: Gaming. Some good choices would be: Thermal Grizzly Kryonaut Thermal Paste or IC Diamond Thermal Compound and for the pads: Fujipoly Extreme Thermal Pads. But if the fan does re-start, then its speed signals would be set back to what it was before. This can lower the operating temperature of your CPU and dGPU so your fans won't need to run as fast, but it will cost money to have this done. If it does not, then you would get a fan failure warning screen and possibly a system shut-down to prevent overheating. If that happens, the first reaction of your system would be to change the fan speed control signal to call for full speed to ensure it DOES re-start.
The NORMAL operation of a fan involves monitoring the fan speed signal for failure - that is, it stops turning and sending a speed signal.
0 kommentar(er)
